AVK Repair clamp Type FS30
Fingers, stainless steel 304L, NBR rubber, vulcanized spanner plate
Contact
Rob Bisschop
Account Manager
FS30 - Triple band stainless steel repair clamp for gas, water and wastewater -40° C up to +100° C
AVK repair clamps ensure a cost effective and reliable solution for quick repairs on steel, copper, asbestos cement, cast iron, PVC and GRP pipes. A pipe with a hole or crack will be repaired permanently. The stainless steel repair clamps are passivated in order to ensure an optimum corrosion resistance. The repair clamps are provided with a waffle structured rubber gasket and rounded tops to create a fully circumferential seal.
| Variant 748/03-1111 | |
|---|---|
| Connection: | All Pipe Types |
| Material: | Stainless steel |
| DN: | DN250 - DN800 |
Features
- Clamp made out of a pre-rolled plate of stainless steel 304L
- Design with welded stainless steel 304L studs and fingers
- Clamp is completely pickled and passivated after welding
- Stainless steel nuts: A4 quality with anti-friction through yellow passivation to prevent galling
- Gasket of NBR rubber with waffle structure and rounded tops
- Vulcanized spanner plate
- Tolerance of triple band repair clamp is max. 36 mm (depends on diameter pipe)
- Clamps available in different diameters: DN 250 up to DN 1000
- Clamps available in different lenghts: 300, 400, 500, 600 and 800 mm (other lengths on request)
- Indication pressure class for (waste)water: 10 bar for DN 250 up to DN 450, 6 bar for DN 500 up to DN 600, 4 bar for DN 650, 3 bar for DN 700, 2 bar for DN 800 and 1 bar from DN 900
- Suitable for low pressure gas up to and including 300 mbar. For higher pressures please contact our sales department
Downloads
Reference nos. and dimensions:
Scroll for more info
| AVK ref. no. | T mm |
L12 mm |
Bolt Size (Metric) |
Theoretical weight/kg |
|---|---|---|---|---|
| 748-03-027050-1111 | 270 - 300 | 500 | 15X M16X18 | 17 |
| 748-03-027060-1111 | 270 - 300 | 600 | 18XM16X180 | 20 |
| 748-03-031050-1111 | 310 - 340 | 500 | 15XM16X180 | 18 |
| 748-03-050050-1111 | 500 - 530 | 500 | 15X M16X18 | 25 |
| 748-03-061080-1111 | 610 - 645 | 800 | 24XM16X180 | 44 |
| 748-03-063050-1111 | 630 - 660 | 500 | 15X M16X18 | 29 |
| 748-03-066060-1111 | 660 - 690 | 600 | 18XM16X180 | 40 |
| 748-03-067040-1111 | 670 - 700 | 400 | 12X M16X18 | 24 |
| 748-03-070030-1111 | 700 - 730 | 300 | 9XM16X180 | 21 |
| 748-03-071040-1111 | 710 - 740 | 400 | 12XM16X180 | 28 |
| 748-03-079050-1111 | 790 - 820 | 500 | 15XM16X180 | 41 |
| 748-03-079080-1111 | 790 - 820 | 800 | 24XM16X180 | 65 |
| 748-03-081050-1111 | 810 - 840 | 500 | 15XM16X180 | 41 |
Enquiry
Scroll for more info
Components
| 1. | Finger | Stainless steel AISI 304L |
| 2. | Stud | Stainless steel AISI 304L |
| 3. | Nut | Stainless steel A4, anti friction |
| 4. | Washer | Stainless steel A4 |
| 5. | Bridge | Stainless steel AISI 304L |
| 6. | Lining | NBR rubber |
| 7. | Body plate | Stainless steel AISI 304L |
| 8. | Spanner plate vulcanized | Stainless steel AISI 304L |
| 9. | Side plate | Stainless steel AISI 304L |
Test/Approvals
- Hydraulic test according to EN 1074-1 and 2 / EN 12266
- Approved according to SABESP Brazil
